Differences

This shows you the differences between two versions of the page.

--- software_behav [2017/06/06 11:02] – admin
+++ software_behav [2017/06/06 11:20] (current) – [Commands Core Set] admin
@@ Line 155: / Line 155: @@
 |**EERB**|Read a byte from EEPROM |4|cc|ADD H|ADD L | | |
 |**EEWB**|Write a byte to EEPROM |5|cc|ADD H|ADD L |VAL | |
+==== Commands Core Set ====
+Command core set is the minimum sets of commands that need to be implemented and whose action cannot be replicated with a combinations of other commands in the same set.
+As we have note before, for instance, the FLCP command, while useful, is not a core command: we can obtain the same effect by using a series of FLRW and FLWW.
+At this stage, the commands that appear to belong to the core set are:
+**RRAM**,**WRAM**,**FLRW**,**FLWW**,**FLPG** and **EEWB**;
+This means that the minimum length for the CVT should be 16, with a margin for two more core system command (in case we realize we have forgotten something) and a set of 7 user comments.
+The other commands listed so far (RPG0, WP0M, FLCP and EERB) can be included in the immediate super-set (len(CVT)=32) together with other commands for ase of use.
+The target should be, however, to start in any case with the core command set ( from now on CMN_LVL_0) and to obtain reconfiguration toward richer command sets using the core command set. In short, we should insure that once a SNC is programmed with the core command set (with an external programmer), it can be upgraded by the MNC through ANT.